China swivel girder coupler Manufacturers Factory Suppliers
-
German Type Double CouplerGerman Type Double coupler 48.3*48.3mm Right Angle Coupler Scaffolding Drop Forged Double CouplerAdd to Inquiry
-
German Type Swivel CouplerGerman Type Swivel CouplerMaterial: Q235BNut Size: 22 mm Tube Diameter: 48.3 mm Weight: 0.97–1.56Add to Inquiry
-
German Type Forged CouplerDimension:48.3*48.3mm/48.3*60.3mm/60.3*60.3mmNut sizes:22mmStandards:EN74/BS1139/CESurface:Hot DipAdd to Inquiry
-
Pressed CouplerSurface: Electro-galvanizedMaterial: Q235Standard: BS1139/EN74Certificate:ISO,SGS,BV TUVProcessingAdd to Inquiry
-
scaffolding single couplerScaffolding single coupler:Surface:Electro-galvanizedMaterial:Q235Standard:BS1139/3N74ProcessingAdd to Inquiry
-
Board Retaining CouplerAll TOPSAR Scaffolding couplers are tested and conform to the requirements of BS1139 and EN74 classAdd to Inquiry
-
Putlog CouplerAll TOPSTAR Scaffolding Forged fittings provide the important combination of strength andAdd to Inquiry
-
Forged Swivel CouplerThis scaffolding fittings connects two scaffold tubes at right angles.This is a load bearingAdd to Inquiry
-
Scaffolding Double CouplerThis scaffolding fittings connects two scaffold tubes at right angles.This is a load bearingAdd to Inquiry
WebSwivel girder coupler . Scaffolding Drop Forged Girder Coupler: 1. Fixed girder coupler is made of drop forged material, designed to connect 48.3 mm tube outside diamemer 2. Unit weight: 1.5 kg....
WebRendez Drop Forged Swivel Girder Coupler. Rendez Drop Forged Swivel Girder Coupler. RDSG-B-486 BS1139/EN 74 Standard Size : 48.6 MM, Slipping Load Test : X-axis : 10 KN Y-axis : 30 KN Z-axis : 6.5...
WebGRAVLOCK GIRDER COUPLERS SWIVEL COUPLER (FORGED TYPE) PUTLOG COUPLER (FORGED TYPE) PROP BRACING SWIVEL COUPLER BOARD RETAINER CLAMP BRC (FORGED TYPE) SWIVEL...
WebThe Girder Coupler has been specifically designed for attachment to either horizontal or vertical flanges, and will accommodate up to 43mm. In erection, the Beam Coupler is highly effective, as it...
WebThe function of the swivel coupler is to connect two scaffold tubes at any angle for ledger, facade or similar bracing. These are important structural components and must be load-bearing. We...
WebBritish Type Girder Swivel Coupler is also called swivel gravlock girder coupler, they allows tube to be used through 360 degrees. – Electro-galvanized. – Always used in...
- Tel: +8619118858768
- Email: lea@topstar-scaffolding.com
- Add: RM.819, BLDG S5, SECTION 182 XIAOXIANG SOUTH RD, YANGHU ST., YUELU DIST., CHANGSHA, HUNAN, CHINA














